background image

ZT-2550/ZT-2551 

User  Manual 

Warranty

 

All products manufactured by ICP DAS are under warranty 
regarding defective materials for a period of one year, beginning 
from the date of delivery to the original purchaser. 

Warning

 

ICP DAS assumes no liability for any damage resulting from the use 
of this product. ICP DAS reserves the right to change this manual 
at any time without notice. The information furnished by ICP DAS 
is believed to be accurate and reliable. However, no responsibility is 
assumed by ICP DAS for its use, nor for any infringements of 
patents or other rights of third parties resulting from its use. 

Copyright

 

Copyright © 2013 by ICP DAS. All rights are reserved. 

Trademarks

 

Names are used for identification purpose only and may be 
registered trademarks of their respective companies. 

Technology

 

Support

 

 

If you have any problems, please feel free to contact us 
via email at 

[email protected]

 

ICP

 

DAS,

 

ZT

2550/ZT

2551

 

User

 

Manual,

 

Version

 

1.3

   

Page

 

1

 

 

Copyright

 

@

 

2013

 

by

 

ICP

 

DAS

 

Co.,

 

Ltd.

 

All

 

Rights

 

Reserved.

 

Summary of Contents for ZT-2550




























Reviews: