Icom SL-1105 Instruction Manual Download

Page: 1 / 66

Document Conventions

The following notational conventions are used in this manual:

The names of utilities, applications, windows (screens)are enclosed in square

brackets ({ }).

The names of utilities, applications, windows (screens), tabs, menus, text boxes, and

check boxes are enclosed in square brackets ([ ]).

The names of and the names of command buttons within dialog boxes are enclosed in

less-than and greater-than signs (<>).

Description of the setup screens in this manual

The setup screens used in this manual are for the SL-1100. Please read those parts
written with SL-1100 as for the SL-1105.

System Requirements

Card slot:Use this LAN card with a computer having a Type ‡U PC card slot
that is CardBus compliant and supports PCMCIA 2.0 (or later versions).

This LAN card is designed for use with PCMCIA card slots that operate at 5.0V.

Operating system:Use this LAN card with a computer running Windows 95 (OSR2

or later), Windows 98 (including the second edition), Windows NT 4.0
(Service Pack 3 or later), or Windows 2000.

Summary of Contents for SL-1105



































































Search results

Summary of Contents for SL-1105

Reviews:

Related manuals for SL-1105

Brands by name

Popular brands

Icom SL-1105, Instruction Manual

Search results

Summary of Contents for SL-1105

Reviews:

Related manuals for SL-1105

Brands by name

Popular brands