Products compatibility and general description
These products are to be used in conjunction with the following Altair, Altair Lite and Altair Plus detectors:
A1000
(AT5910CPR)
Altair smoke detector
HFI-EBS-06
,
HFI-EBSB-23W-06
,
HFI-EBSB-23R-06
A2000
(AT5910CPR)
Altair smoke / temperature detector
HFI-EBS-06
,
HFI-EBSB-23W-06
,
HFI-EBSB-23R-06
A3500
(AT5910CPR)
Altair temperature detector
HFI-EBS-06
,
HFI-EBSB-23W-06
,
HFI-EBSB-23R-06
A1000L
(AT5010CPR)
Altair smoke detector without isolators
HFI-EBS-06
,
HFI-EBSB-23W-06
,
HFI-EBSB-23R-06
A2000L
(AT5010CPR)
Altair smoke / temperature detector without isolators
HFI-EBS-06
,
HFI-EBSB-23W-06
,
HFI-EBSB-23R-06
A3500L
(AT5010CPR)
Altair temperature detector without isolators
HFI-EBS-06
,
HFI-EBSB-23W-06
,
HFI-EBSB-23R-06
A1000+
(AT5910CPR)
Altair Plus smoke detector
HFI-ABS-06
,
HFI-ABSB-23W-06
,
HFI-ABSB-23R-06
A2000+
(AT5910CPR)
Altair Plus smoke / temperature detector
HFI-ABS-06
,
HFI-ABSB-23W-06
,
HFI-ABSB-23R-06
A3500+
(AT5910CPR)
Altair Plus temperature detector
HFI-ABS-06
,
HFI-ABSB-23W-06
,
HFI-ABSB-23R-06
(In brackets, DOP reference)
These products are compatible only with control panels that use the Vega protocol.
In order to work, these sounder bases require a suitable host detector.
Following the triggering of an alarm condition on the host detector, the
Altair Flexiplus
base sounder activates its acoustic output, previously
selected through its selector; similarly,
Altair Plus Flexiplus
base sounders activate the acoustic output, but in this case its pattern is previously
selected from the control panel.
Base sounders equipped with VAD (Visual Alarm Device), in conjunction with the acoustic signal, also emit an alarm visual signal; specifically:
- for
HFI-EBSB-23W-06
and
HFI-ABSB-23W-06
white optical alarm signal
- for
HFI-EBSB-23R-06
and
HFI-ABSB-23R-06
red optical alarm signal.
Product parts
Ceiling mounting bracket (picture 1)
1. Sound diffuser cone.
2. Loop cables passage.
3. Pre-cut holes for screwing the bracket to the ceiling.
4. Fixing pins.
Base sounder (picture 2)
1. Adaptor base for the host detector.
2. Loop cables passage.
3. Selector for the acoustic tone, volume and VAD output intensity (
Altair
Flexiplus
only).
4. Bracket-base sounder screw fixing location.
5. VAD output.
6. Acoustic alarm signal outlet.
7. Bracket’s pins hosting holes.
HFI-EBS-06
ALTAIR FLEXIPLUS BASE SOUNDER
HFI-EBSB-23W-06
ALTAIR FLEXIPLUS BASE S WHITE VAD
HFI-EBSB-23R-06
ALTAIR FLEXIPLUS BASE S RED VAD
HFI-ABS-06
ALTAIR PLUS FLEXIPLUS BASE SOUNDER
HFI-ABSB-23W-06
ALTAIR PLUS FLEXIPLUS BASE S WHITE VAD
HFI-ABSB-23R-06
ALTAIR PLUS FLEXIPLUS BASE S RED VAD
STERLING SAFETY SYSTEMS
- Unit B12a, Holly Farm Business Park, Honiley, Warwickshire,
CV81NP
www.sterlingsafety.co.uk
1
2
3
4
3
4
Picture 1
Picture 2
7
6
7
5
5
2
3
4
4
1
5
