![background image](http://html.mh-extra.com/html/hp/j9170a/j9170a_user-manual_156283001.webp)
Item
Specification
Frequency, GHz
2.4-2.5 & 5.1-5.9
Gain with 34” cable (dBi)
10.9 @ 2.4-2.5 GHz, 13.5 @ 5.1-5.9 GHz
VSWR Maximum
2.0:1
3 dB Beamwidth - Azimuth
45° @ 2.4 GHz / 20° @ 5.0 GHz
3 dB Beamwidth - Elevation
45° @ 2.4 GHz / 20° @ 5.0 GHz
Polarization
Linear, 2 Vertical, 1 Horizontal
Maximum Input Power
10 Watt
Cable Length
34 in. (860 mm) Plenum rated
Mechanical Size
16.2” x 14.7” x 1.4”
(411.4 x 373.3 x 35.8 mm)
Weight
2.4 lb. (1.1 kg)
Antenna Connection
Type N (male) connector (3x)
Radome
ASA
Mount Style
Articulating for Mast / Wall
Operating Temperature
-30°C to +65°C
Wind Surface Area
@ 0°, 0.0067 m
2
/ @ 90°, 0.009 m
2
Wind Survival
200 km/h
Water / Dust Seal Rating
IP67
SAFETY
The HP J9170A and all associated equipment should be installed in
accordance with applicable local and national electrical code guidelines
to ensure safe operation.
Before connecting an outdoor antenna to an HP Wireless Access Point,
be sure that the access point radio power levels are set in accordance
with local regulatory requirements. For information on setting radio
power levels, see
Transmit power control in the MSM3xx/4xx Access
Points Management and Configuration Guide
.
For mandatory antenna power settings by country/region, look for
Antenna Power-Level Setting Guide (for MSM products) at
www.hp.com/networking/support.
Please read all instructions carefully before attempting to
install and use this product.
DESCRIPTION
The HP J9170A is a dual-band, point-to-point directional panel antenna
for use in 802.11n MIMO applications. Enclosed in a compact, low-profile
radome, the antenna is mounted to a rugged, articulating mount. The
mount can be affixed to a mast or anchored to a wall.
Each of the three MIMO antenna elements are connected to the access
point via low-loss, plenum-rated coaxial pigtails. The radiation patterns
are uniform and symmetrical, providing high-level signal density into
defined coverage zones.
This antenna will greatly enhance the performance of 802.11n systems.
The dual-band frequency coverage means that a single antenna can be
deployed with any MIMO radio in the 2.4-2.5 GHz or 5.1-5.9 GHz bands.
ANTENNA PORTS
Antenna cable port identifaction and polarization is as follows:
•
Port 1 (Blue), vertically polarized
•
Port 2 (Red), vertically polarized
•
Port 3 (Green), horizontally polarized
Respect color coding when connecting to the access point (AP).
SPECIFICATIONS
WARRANTY AND SUPPORT INFORMATION
See the warranty and support information included with this product.
For the latest information, go to www.hp.com/networking/support.
HP 10.9 / 13.5 dBi Dual-Band Point-to-Point 3-Element MIMO
Directional Antenna (J9170A) Guide
© Copyright 201
1
, Hewlett-Packard Development Company, L.P
.
The information contained herein is subject to change without notice.
Printed in Malaysia
May
201
1
Part Number: 5998-0860
GROUNDING
:
System grounding and lightning protection are
essential, especially for exterior-mounted antennas exposed to the
elements. Never install an antenna where it may fall and contact
electrical lines.
*5998-0860*
J9170A
HP 10.9/13.5 dBi Dual-Band Point-to-Point 3-Element MIMO Directional Antenna (J9170A) Guide
SAFETY
The HP J9170A antenna and all associated equipment should be
installed in accordance with applicable local and national electrical
code guidelines to ensure safe operation.
Before connecting an outdoor antenna to an HP Wireless Access
Point, be sure that the access point radio power levels are set in
accordance with local regulatory requirements. For information on
setting radio power levels, see
Transmit power control
in the
MSM3xx/4xx Access Points Management and Configuration Guide
.
For mandatory antenna power settings by country/region, look for
Antenna Power-Level Setting Guide (for MSM products)
at
www.hp.com/networking/support.
Please read all instructions carefully before attempting to
install and use this product.
Grounding:
System grounding and lightning protection are essential,
especially for exterior-mounted antennas exposed to the elements.
Never install an antenna where it may fall and contact electrical lines.
SPECIFICATIONS
WARRANTY AND SUPPORT INFORMATION
See the warranty and support information included with this product. For
the latest information, go to www.hp.com/networking/support.
DESCRIPTION
The HP J9170A is a dual-band, point-to-point directional panel
antenna for use in 802.11n MIMO applications. Enclosed in a
compact, low-profile radome, the antenna is mounted to a rugged
articulating mount. The mount can be affixed to a mast or anchored to
a wall. Each of the three MIMO antenna elements are connected to the
access point via low-loss, plenum-rated coaxial pigtails. The radiation
patterns are uniform and symmetrical, providing high-level signal
density into defined coverage zones.
This antenna will greatly enhance the performance of 802.11n
systems. The dual-band frequency coverage means that a single
antenna can be deployed with any MIMO radio in the 2.4-2.5 GHz or
5.1-5.9 GHz bands.
ANTENNA PORTS
Antenna cable port identification and polarization is as follows:
• Port 1 (Blue), vertically polarized
• Port 2 (Red), vertically polarized
• Port 3 (Green), horizontally polarized
Respect color coding when connecting to the access point (AP).
Item
Specification
Frequency
2.4-2.5 GHz & 5.1-5.9 GHz
Gain with 34” cable (dBi)
10.9 dBi @ 2.4-2.5 GHz, 13.5 dBi @ 5.1-5.9 GHz
VSWR Maximum
2.0:1
3 dB Beamwidth – Azimuth
45°@ 2.4 GHz /20°@ 5.0 GHz
3 dB Beamwidth – Elevation
45°@ 2.4 GHz /20°@ 5.0 GHz
Polarization
Linear, 2 Vertical,1 Horizontal
Maximum Input Power
10 Watt
Cable Length in. (mm)
34” (860 mm) Plenum rated
Mechanical Size in. (mm)
16.2”x 14.7”x 1.4” (411.4 x 373.3 x 35.8mm)
Weight
2.4 lb. (1.1 kg)
Antenna Connection
Type N (male) connector (3x)
Radome
ASA
Mount Style
Articulating for Mast/Wall
Operating Temperature
-30º C to +65º C
Wind Surface Area
@ 0º, 0.0067m
2
/ @ 90º, 0.009m
2
Wind Survival
200 km/h
Water/Dust Seal Rating
IP67
New coming
Photo 1
Port 1 (Blue)
Port 2 (Red)
Port 3 (Green)
© Copyright 2010, Hewlett-Packard Development Company, L.P.
The information contained herein is subject to change without notice.
Printed in Malaysia
November 2010
Document Part Number: 5998-0860
*5998-0860*
Port 1 (Blue)
Port 3 (Green)
Port 2 (Red)