Non-Programmable Single Stage Thermostat
Reference No.:
HTW-ST01-A
- 1 -
Version 2019-1.0
Installation and Operation Manual
1 Heat / 1 Cool single stage thermostat.
Non Programmable, Compatible with heat pump system
****************************************************
This thermostat is compatible with the following systems:
•
Gas, oil, Propane or electric furnace
•
Central air conditioner
•
Geo Thermal / Hot water system with or without pump
•
Millivolt system
•
Central heating and cooling system
•
Heat pump without auxiliary/backup heat
•
Forced Air / In-Floor Radiant / Radiator system
•
ºF or ºC configurable
•
Child Lock Function
•
Large LCD display, Backlight.
•
Heat and Cool set point storage.
•
Display of room temperature, set temperature and current time simultaneously.
•
Fan switch ON and AUTO.
•
Permanent user setting retention during power loss. No batteries are required.
•
Apply to 24VAC or 2 *AA alkaline batteries power supply.
•
Air Filter change Indicator, Low Battery Indicator, Temperature calibration.
•
4- or 5-wire compatible (C is optional for non-heat pump systems)
•
Manual Changeover / Fan Switch, Easy operation friendly.
•
Mercury-Free, Environmentally Safe
•
Built-in compressor protection
Power Supply
20VAC-30VAC 50-60HZ or Battery powered.
Terminal Load
1.0A per terminal, 3.0A maximum total load
Set Point Temp. Range
45ºF to 90ºF (7ºC to 32ºC).
Accuracy
+/- 1ºF or +/- 0.5ºC.
Dimensions
6.0” W X 4.7” H X 1.1” D/152.5x120x28mm
Color
White
Installation Hole Distance
3.37
”/85.5mm Horizontal and 3 1/4
”
(83 mm)Vertical
or 2.36”/60mm Horizontal
Identify System Type
Features
Specification
Display
Time
Room Temperature
Setting Temperature
/
Heating/Cooling Output
Heat/Off/Cool Mode Indicate
Low Battery Indicate
Compressor Timing Delay
Fan Status
