background image

OWNER’S 

MANUAL 

 

 Warning 

 

! Do not slide, climb, or 
play on pole. 

 

! Keep organic 
material away from 
pole base. Grass, 
litter, etc. could cause 
corrosion and /or 
deterioration. 

 

! Check pole system 
twice a year for signs 
of corrosion (rust, 
pitting, and chipping). 
Remove rust and/or 
loose paint completely 
and repaint with 
exterior enamel paint. 
If rust has penetrated 
through the steel 
anywhere, replace 
pole immediately. 

 

! Check unit before 
each use for loose 
hardware, excessive 
wear, and signs of 
corrosion and repair 
before using. 

 

! During play, use 
extreme caution to 
keep players face 
away from the 
backboard, rim, and 
net. 

 

! Wear a mouth guard 
when playing to avoid 
dental injuries. 

 

! When adjusting 
height, keep hands 
and fingers away from 
moving parts. 

 

! During play, do not 
wear jewelry (rings, 
watches, necklaces, 
etc.). Objects may 
entangle in net. 

 

 

 

Pro Dunk® Platinum 

Basketball System  

 

MODEL NUMBER 

PD-P-G 

 

WELCOME TO THE FAMILY OF PRO 

DUNK

®

 

OWNERS 

 

Thank you for purchasing our basketball system. We try hard to 
ensure that our products are of high quality and free of 
manufacturing defects and of missing parts. However, if you have 
any problems with your basketball pole, such as a manufacturing 
defect or a missing part please contact us at the following: 

 

 

Please provide model number, serial number, and/or part number 
of the product and/or part when you call, write or email. These 
numbers can be found on the product, packaging, or in this owner's 
manual. 
 

 
 
Read this manual all the way through before starting to put up 
your pole. Then read each step completely before beginning 
that step. 

 

Toll Free

: 1.800.294.4667 

Web

: www.hoopsincorporated.com 

FAX

: (281) 357-4822

 

Hoops Incorporated 

22047 Lutheran Church Rd. 
Tomball, TX 77377 

 

 

 

1

Summary of Contents for PD-P-G













Reviews: