![background image](http://html.mh-extra.com/html/honeywell/excel-5000-open-xfl521b/excel-5000-open-xfl521b_product-data_151390001.webp)
® U.S. Registered Trademark
Copyright © 2002 Honeywell Inc. • All Rights Reserved
EN0B-0090GE51 R0802
74-2145-2
Distributed I/O
XFL521B, 522B,
523B, AND 524B MODULES
PRODUCT DATA
FEATURES
•
L
ON
M
ARK
™ compliant
•
2-wire L
ON
W
ORKS
®
bus interface between controller
and I/O
•
No additional field terminals required
•
Usable with Excel 500 controllers in conjunction with
standard internal I/O modules
•
Automatic binding and commissioning to Excel 500
controllers when using CARE
•
Connector module with sliding bus connector
(eliminating the need to wire together neighboring
modules)
•
Fast connection due to spring clamp terminals
•
Module exchange during operation
•
Alarm in case of defective module
•
Mechanical coding prevents mismatching of modules
•
Power LED (L1, green) and L
ON
W
ORKS
service LED
(L2, red) on all electronics modules
•
Status LEDs for outputs and digital inputs
•
Optional manual override modules for analog and
digital output modules with feedback
•
XILON for wiring test
GENERAL
The XFL521B, 522B, 523B, and 524B modules are L
ON
M
ARK
compliant digital and analog I/O modules which can be
installed at strategic locations within a building. These
modules convert sensor readings and provide output signals
used for operating actuators via L
ON
W
ORKS
standard network
variables (SNVTs). Each Distributed I/O module plugs into a
base terminal block allowing communication with controllers
via the built-in Echelon
®
L
ON
W
ORKS
bus interface. The ter-
minal block provides spring clamp terminals for easy connec-
tion of field cables from the various sensors and actuators.
The modular system allows Distributed I/O modules to be
removed from the system without disturbing other modules.
The module with terminal block mounts easily onto a DIN rail.
When using CARE, the Distributed I/O modules can be
automatically bound and commissioned to the Excel 500
CPU (XC5010C, XC5210C, XCL5010) and XL50. When the
modules are used by other controllers, provided plug-ins
permit the modules to be commissioned by CARE 4.0 or by
any LNS network management tool.
DESCRIPTION
These Distributed I/O modules use a Neuron® chip and an
FTT-10A free topology transceiver for communication on a
L
ON
W
ORKS
bus and comply with L
ON
M
ARK
Application Layer
Guidelines V3.2.
Table 1. Modules and accessories
Item
Description
XFL521B
Analog input module
XFL522B
Analog output module
XFL523B
Digital input module
XFL524B
Digital output module
XSL511
L
ON
W
ORKS
connector module
XSL512
Manual terminal disconnect module
XSL513
Terminal block for XFL521x, 522x, 523x
XSL514
Terminal block for XFL524x
XFR522A
Analog output manual override module
XFR524A
Digital output manual override module
XAL-Code
To prevent mismatching modules
XAL-Term
Interface to the L
ON
W
ORKS
bus
209541B
LonWorks bus termination modules
XAL 2
Cover release tool
XAL 1
Swivel label (for manual override modules)