HME Jtech Ralpha, Programming Manual

Page: 1 / 3

RALPHA
Key Pad Programming
1
A. New Pager/First time programming: (See below “B” to add/change Capcodes to Pager already in
use/field)
Insert battery – Pager will display battery condition followed with the type of pager e.g., HME Wireless and time and
date
1. Press “ ” twice to display function menu. Press the “ ” to move the cursor to
“ ON/OFF PAGER ” – Press function key to turn the pager OFF.
2. Press and hold “ ” and “ ” for 2 seconds simultaneously. The screen will display
“ 1234 ”. Default password is “ 0000 ”. While the cursor is under the first digit “ 1234 ” press function key to change
the digit to “ 0 ”. Move cursor with “ ” to second digit “ 0234 ” and press the “ ” to
change the value to “ 0 ”. Continue doing the same for the 3
rd
and 4
th
digits.
3. On completio n of above press the “ ” to access the main menu as below:
“ ADSYSBFRQT ”
Move cursor by using “ ” to select one of the followin g options:
AD: Pager Capcode Settings
SY: System Parameter Settings
SB: Reserved (not used now)
FR: Frequency Settings
QT: Save and Quit
4. With the default AD selected press the “ ” to view the capcode settings. The following will display:
Ex.: “ 1:1234560 0 ”
1: ID of the First Capcode
1234560: The 7-digit Capcode
0: Message Type – 0 — Normal personal Message (default) / 1 — Mail Drop (public) message