background image

 

 

 

 

 
GUIDE 

Cat. No. 42.7003 
Instruction Manual 

 

 
 
 
 
 
 
 

 

INTRODUCTION 

This device is a digital product that provides altimeter, barometer, compass, altimeter data, dual time,  
chronograph, chronograph data and alarm functions.  
 

Features: 
Altimeter 

- 1 meter (or foot) resolution and with working range from  -700 meters (-2296 feet) to 9000 meters (29520 feet).  
- Graphical expression of changes provided. 
- Unit in meters or feet selectable.  
- 20 memories with date, time and altitude reading.  

Barometer 

- 1 hPa resolution and with working range from 300 hpa to 1100 hpa.  
- Graphical expression of changes provided. 
- Both sea level pressure and absolute pressure can be shown.  
- Weather forecast. 
- Temperature displayed in °F or °C selectable. 

Compass 

- Electronic compass providing 16 cardinal indications together with bearing in degrees.  
- Declination correction provided. 

Time 

- 2 time modes selectable. 
- Presents day of the week, day, hours, minutes and seconds (year and month can also be set).  
- 12/24-hour formats selectable. 
- Auto-calendar from 2000 to 2049. 

Summary of Contents for 42.7003
















Reviews: