84800120
Pistol Grip Grease Gun Set
Assembly
• Screw the Outlet Pipe (2) into the Gun Head(1)
• Fit the solid extension pipe (3) to the outlet pipe(2) or the flexible extension pipe(4)
• If the Flexible Pipe (4) is to be used you will need to fit the Grease nipple coupler (5).
Loading the Grease cartridge into the gun
• Remove the barrel (6) from the Gun head (1)
• Pull back the Sprung pull rod (7) as far as it will go, (this will automatically lock in its extended
position)
• Remove the plastic cap(8) from the grease cartridge(9)
• Insert the grease cartridge(9) into the barrel
• Remove the foil seal from the cartridge top
• Refit the Barrel(6) with the fitted cartridge( back into the gun head(1)
• Release the locking lever (7) at the base of the barrel(6) this will then pressurize the grease
into the gun head
Greasing
Wipe clean the grease fitting and the tip of the nozzle, connect the nozzle, and then reciprocate
the lever. If grease is charged normally, old grease is pushed out from the groove or clearance
near the fitting. For the amount of grease to charge, refer to the instruction manual for the target
machine, or charge the machine with new grease until old grease is completely pushed out.
