background image

MODEL #HLDS01-GTHG

                 HLDS01-GTSS

                 HLDS01-GTCB

FLAME PATIO HEATER

Owner’s

  Manual

1

WH19/02

Questions, problems, missing parts?

 Before returning to your retailer, call our customer 

service department at 

1-888-775-1330

, 7 a.m. - 4 p.m., PST, Monday - Friday. 

Serial Number

Purchase Date

Precaution!

The Powder Coating paint process has become the 

most common widely used application in the outdoor 

furniture category. Unfortunately powder coating is 

extremely sensitive to Humidity and Moisture. A 

simple process to protect your furniture, especially 

flat surfaces is to apply a simple coat of good quality 

car wax prior to using. If this process is done every 

few months it will protect your furniture for years 

to come.

INSTALLER/ASSEMBLER: Leave this 

manual with consumer.

CONSUMER: Keep this manual for 

future reference.

Distributor: AZ PATIO HEATERS LLC

8601 W. Jefferson St Suite 200,  Tolleson, AZ 85353

ANS Z83.26-2014 • CSA 2.37-2014 Gas-Fired Outdoor Infrared Patio Heater

ATTACH YOUR RECEIPT HERE

DANGER

If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. If odor continues, keep away from the appliance 

and immediately call your gas supplier or fire 

department.

DANGER

CARBON MONOXIDE HAZARD

This appliance can produce carbon

monoxide which has no odor. 
Using it in an enclosed space can kill 

you.
Never use this appliance in an 

enclosed space such as a camper, 

tent, car or home.

WARNING

Do not store or use gasoline or other flammable 

vapors and liquids in the vicinity of this or any other 

appliance. An LP-cylinder not connected for use shall 

not be stored in the vicinity of this or any other 

appliance.

WARNING

Improper installation, adjustment, alteration, service

or maintenance can cause property damage, injury or

death. Read the installation, operation and 

maintenance instructions thoroughly before installing 

or servicing this equipment.

WARNING:

For Outdoor Use Only

Summary of Contents for HLDS01-GTCB






















Reviews: