User Manual
COPYRIGHT ©2018 Hangzhou Hikvision Digital Technology Co.,Ltd.
ALL RIGHTS RESERVED.
About this Manual
due t
o fir
mware updates or other reasons.
Please use this user manual under the guidance of professionals.
Trademarks Acknowledgement
owners.
whilst, for safety reasons, having limited output current.
1. Log in to the and input” Hik-Connect” to search the mobile
client. Download and install Hik-Connect to your phone.
3. Power on the security control panel.
4. Log in the Hik-Connect and tap the icon”+” at the upper-right coner of the
Hik-Connect page to add the security control panel. You can scan the QR code
on the device rear panel or on the package box, or input the device serial No.
1
flashing
red and green.
1.Make the security control panel enter the register mode.
Note:
The distance between the security control panel and the detector
should be less than 50 cm.
Register Detector
Register Panic Button
2
DS-PD1-EB-WS2
Diagram References
(iv)
(iii)
(i) Slow flashing
(ii) Fast flashing
(vi)
(v)
D
Appearance
Indicator
Yes
Red, Amber, Green
Two-way wireless technology
Yes
APP Store
Product Information
This product and - if applicable - the supplied accessories too
are marked with "CE" and comply therefore with the applicable
For electrical products sold within the European Community. At the
end of the electrical products life, it should not be disposed of with
your local Authority or retailer or recycling advice in your country.
1
Appearance Description
1
LEDs: General LEDs
3
(i) From power up: Not registered
(iii) 8 x Flashed: Registered
(vi) Control panel has not received the signal from HUD
2
One push to learn
Yes
Transmission method
Fully encrypted rolling code
Two-way wireless technology
-10°C to +40°C(Ce
)
Dimensions(H x W x D)
70 x 30 x 20 mm
Transmission frequency
433MHz, FM transceiver
Range in open space
300m
Electrical
＆
CR1/3N
3.0 V
Threshold
2.1V +/- 5%
3
compliance could void the user’s authority to operate the equipment.
FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device,
turning the equipmen
t off and on, the user is en
couraged to try to correct the interference by one or more of
the following measures:
—Reorient or relocate the receiving antenna.
—Connect the equipment into an outlet on a circuit di
ff
erent from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and
your body.
1. This device may not cause harmful interference.
FCC Information
Hangzhou Hikvision Digital Technology CO.,Ltd. No.555 Qianmo Road, Binjiang District, Hangzhou 310052, China
R=Red G=green
G
R
G
G
G
R
R
G
G
R
R
UD09712B-A
