SJS10-M HYDRAULIC STEPPED JAW SPREADER
OPERATING AND SAFETY INSTRUCTIONS
TDS:-
1374
Prepared by:- Matthew Hughes
Approved by:- Mark Dalley
Date:
05/12/12
REV NO:-
002
ECO:-
3957
Page
1
of
9
The Hi-Force SJS10-M hydraulic spreader is a self contained unit, the spreaders are
despatched from the factory pre-filled with oil, and are ready for use.
INSPECTION UPON RECEIPT OF GOODS
On initial receipt of goods visually check for transit damage. If found contact the carrier
immediately.
SAFETY
Read these instructions and safety warnings fully. Failure to do so could result in Death,
Personal injury or equipment damage.
.
Wear suitable personal protection equipment when operating hydraulic equipment.
Keep all body parts away from tool and work piece / load.
Do not work on an assembly held open only by hydraulic means. Always use the safety
block provided to keep a joint open.
