Heli-Max
™
AXE
™
CP-L 3S LiPo Battery & Charger
SPECIAL FEATURES
•
A very economical, portable and simple way to balance charge
LiPo batteries
•
Specifi cally designed for 3-cell lithium-polymer batteries only
•
“Constant current / constant voltage” charge method
•
Automatically starts charge when the battery is connected to
the charger
•
800mA maximum charge current requires no adjustment
•
Bi-color LED indicates charging status
INCLUDED
(1) GPMP0401 ElectriFly
™
3-cell 950mAh 11.1V LiPo Battery
Charger & Power Supply
(1) GPMM3315 ElectriFly 3-cell 11.1V LiPo Balance Charger
(1) AC Wall Adapter
(1) 12V Car Adapter
CHARGER SPECIFICATIONS
Input voltage:
12V DC
Battery types, # cells:
3 lithium-polymer cells
connected in Series (11.1V LiPo)
Charge current:
800mAh maximum
Charge termination:
Voltage detection
Minimum battery capacity:
800mAh
Status indicator:
one bi-color LED
Input connectors:
polarized DC power jack
for DC input
Output connectors:
one balance plug
Case size:
2.0 x 1.14 x 2.74in
[51 x 29 x 70mm]
Weight: 2.7oz.
[77g]
BATTERY SPECIFICATIONS
(1) GPMP0401 Electrifl y 3-cell 950mAh 11.1V LiPo Battery
Capacity:
950mAh
Number of Cells in Series:
3
Rated Voltage:
11.1V
Max. Charge Voltage:
12.6V
Min. Discharge Voltage:
7.5V
Maximum Recommended
Charge Current:
950mA
Continuous Discharge Current:
14.25A (15C)
Pack Dimensions:
2.6 x 1.5 x 0.9in
[66 x 37 x 22mm]
Weight:
2.9oz [83g]
IMPORTANT PRECAUTIONS
WARNING!! Read the entire instruction sheet included with this
battery and charger. Failure to follow all instructions could cause
permanent damage to the battery, charger or its surroundings, and
cause bodily harm!
•
Only use a LiPo approved charger. NEVER use a NiCd / NiMH
peak charger!
•
Do not attempt to use this charger with NiCd or NiMH
battery packs.
•
Never charge in excess of 4.20V per cell.
•
Only charge through the “charge” lead. Never charge through
the “discharge” lead.
•
Use only approved power input accessories- either the included
12 V car adapter or the included AC adapter.
•
If the battery should become damaged, discard the battery. Do
not attempt to use a damaged battery.
•
Do not leave the charger unattended while charging. Disconnect
the battery and remove input power from the charger immediately
if either becomes hot! However, It is normal for the charger to
get warm.
•
Disconnect the battery from the charger and carefully move
the battery to a fi reproof location if the battery begins to swell
or smoke!
