![background image](http://html.mh-extra.com/html/helgi/video-motore-projection-screen/video-motore-projection-screen_instruction-and-maintenance_2120520001.webp)
Helgi Europe
Via Artigiani 29/31 29020 Vigolzone (PC) Italy
[email protected] | [email protected]
www.helgi-solutions.com
1
INSTRUCTION AND MAINTENANCE
VIDEO MOTORE PROJECTION SCREEN
1.1 TECHNICAL DATA
PRODUCT DESCRIPTION
Screens made with the following projection fabrics: SOFT WHITE, MATT WHITE SOFT, SOFT WHITE TRANSOUND, RETRO
(see technical pages 5/6/7) – In the standard version, the screen is lowered from the front side of the box, by wall
installation the fabric will descend at a distance from the same of mm 81.5 to 97.5, on request, the screen can be
provided with rear lowering system, in this case the fabric will be at a wall distance of approximately 22.5 to 16.5 mm -
Screen case of extruded aluminium, powder coated in white RAL 9010, section 85x93 mm with rounded corners on the
upper ribs suitable for the fixation of hooking brackets; on the bottom part longitudinal slot with rounded edges,
through which the projection fabric descends, – Internal tube for the screen rewinding, of anodized aluminium silver Ø
60 mm, which incorporates the electric motor on special silent-block rubber – Single phase electric motor, IMQ, CE, 5-
year warranty from date of purchase, supply 200V - 50Hz, 0.5 A absorption, degree of protection IP 44, 17 RPM, in the
standard version the motor is mounted on the left side – screen up and down electric inverter standard supplied. Screen
up and down limit switches factory adjusted, possibility of different settings if necessary. The screen can also be stopped
at intermediate height by pressing the electric inverter switch - Suspension brackets are standard supplied and can be
mounted anywhere along the whole housing length. Brackets are steel made, epoxy powder coated in white RAL 9010,
suitable both for wall or ceiling installation thanks specific expansion anchors - Screen case end caps steel epoxy coated
in white RAL 9010 – Robust individual packing in double cardboard type Volcano - Product CE certified, full warranty 24
months as specified on the operating and maintenance manual- Optional accessories: radio remote control, spacing
brackets - Box dimensions: size of the base of the 7 cm