SR4SE, SR6SE & SR8SE
SMOKE EXEMPT
FREESTANDING STOVE
Installation and Operating
Instructions
Please hand these instructions to the stove user when the installation is complete. Leave the stove ready for
operation and instruct the user in the correct use of the appliance and operation of controls.
Important: –
This product must be installed by a suitably qualified installer.
Heat Design Ltd.
30-60 Hawthorn Road
Western Industrial Estate,
Naas Road,
Dublin 12
www.heatdesign.ie
PLEASE READ ALL THESE INSTRUCTIONS CAREFULLY!
For safety reasons it is essential that your stove is correctly installed and operated. Heat Design
cannot accept responsibility for any fault or consequential problems arising through incorrect
installation or operation.
These appliances have been approved by HETAS Ltd as intermittent operating appliances for
burning wood logs only
Please affix the serial number here
before putting the manual in the stove
The SR4SE, SR6SE and SR8SE have been exempted under the clean air act of 1993 as suitable for use
in smoke control areas when burning seasoned wood logs. The stove contains a factory fitted
secondary air stop which ensures that the secondary air is permanently open 4-9mm minimum. Please
carefully read the instructions on wood burning contained in this manual, these MUST be adhered to at
all times. Please see page 16 of the manual for further reference to the clean air act of 1993
