background image

QUESTIONS? 1 866 599-5916 poste/ext. 2

Our Customer Service staff is ready to provide assistance. In the case 

of a damaged or missing part, most replacement parts ship from our 

facility in two business days.

For immediate help with assembly, or for additional product information, 

call our toll-free number: 1 (866) 599-5916 ext. 2.

C

Notre personnel du Service à la clientèle est disponible pour vous 

aider. Dans le cas d’une pièce endommagée ou manquante, la plupart 

des pièces de remplacement sont expédiées de notre usine en deux 

jours ouvrables.
Pour de l'aide immédiate avec le montage ou pour en savoir plus

sur le produit, composez notre numéro sans frais:

1 866 599-5916 poste 2.

C

MARTEAU ROTATIF

MARTEAU ROTATIF

Guide d’utilisation (p.2)

ROTARY HAMMER

Operator’s manual (p.13)

Z1C-DW-30M1

59595002

CONSERVEZ CE GUIDE

Vous aurez besoin de ce guide pour les règles de sécurité, le fonctionnement et la garantie. Conservez-le avec

la facture originale dans un endroit sûr, au sec.

SAVE THIS MANUAL

You will need this manual for safety instructions, operating procedures, and warranty. 

Put it and the original sales invoice in a safe, dry place for future reference.

Summary of Contents for 59595002

























Reviews: