background image

  

 

           

 

BUILT-IN GAS FIRE BURNER KIT 

 

              

ASSEMBLY INSTRUCTIONS AND SAFETY GUIDE 

U

 

10BU

SR2201BI/I2+, SRR2201BI/I2+ &  

SR4001BIS/I2+, SR4001BIR/I2+ 

                                                                                                

0063/YY

SR2201BI/I2+ &SRR2201BI/I2+ Preferential 

Σ Qn(Hs)= 6.5 kW, 473 g/h  I3+(28-30/37), I3 B/P(30), I3 B/P(50), 

I2L & I2H/I2E/I2E+ 
SR4001BIS/I2+ & SR4001BIR/I2+ Preferential 

Σ Qn(Hs)= 12 kW, 873 g/h  I3+(28-30/37), I3 B/P(30), I3 B/P(50) 

& I2L 
SR4001BIS/I2+ & SR4001BIR/I2+ Preferential 

Σ Qn(Hs)= 13 kW, 946 g/h  I2H/I2E/I2E+ 

BE, CY, CZ, EE, GR, IT, IE, PT, ES, LU, GB, FR, IS, LT, PT, SK, CH: Cat. I

3+ 

Butane(G30)=28~30 mbar, 

Propane(G31)=37mbar, Injector SR2201BI/I2+ & SRR2201BI/I2+:1.2 mm  SR4001BIS/I2+ & SR4001BIR/I2+: 
1.65mm   
CY, CZ, DK, EE, FI, GR, LV, LT, LU, MT, NL, NO, SK, SI, SE, TR, HU: Cat. I

B/P(30)=Butane, propane or 

their mixture at 30mbar, Injector SR2201BI/I2+ & SRR2201BI/I2+: 1.2 mm  SR4001BIS/I2+ & 
SR4001BIR/I2+:1.65mm 
AT, DE, SK, CH: Cat. I

B/P(50)= Butane, propane or their mixture at 50mbar,  Injector SR2201BI/I2+ & 

SRR2201BI/I2+: 1.02mm  SR4001BIS/I2+ & SR4001BIR/I2+: 1.45mm  
AT, BE, CH, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IT, LT, LU, LV, NL, NO, PL, PT, RO, SE, SI, SK: Cat. 
I

2L

 Natural Gas(G25) at 25mbar, Injector SR2 & SRR2: 1.95mm  SR40, 

SR40: 3.0mm and I

2H

/I

2E

/I

2E+

 Natural Gas(G20) at 20mbar, Injector SR2 & SRR2: 

1.72mm  SR40 & SR40: 3.0mm    
“  Only  nationally  approved  hose  and  regulator  corresponding  to  the  appliance  category  and  pressure 
must be used ” 
This manual is for:  

PIN NO.:  0063CO7314 

FOR OUTDOOR USE ONLY 

Read the instructions before using the appliance. Keep the instructions for future reference. 

Warning: Accessible parts may be very hot, keep young children away. 

Summary of Contents for 4001BIS/I2 Plus





















Reviews: