FlowOx™ How to guide
1. Setting up the boot
Place the positioner grooves onto the
pressure chamber ridges. Move forwards
or backwards as required.
a
Insert padding and place air vents into holes.
Attach the fastening band to the studs.
b
Place the seal onto the stud
and around the top of the
pressure chamber.
c
Attach the strap around the
bottom of the seal and at the
front. Fasten onto the stud.
d
2. Treatment – regular use
Connect the hose from the pressure chamber to
the control unit. Connect the control unit to the
power supply.
Place the seal onto the
stud and around the
top of the pressure
chamber.
Place foot on top of the
positioner centrally in
the pressure chamber.
Pull the seal onto
the leg to make the
pressure chamber air
tight.
Start treatment by
pressing the ‘On/Off’
button.
a
b
c
d
e
