![background image](http://html.mh-extra.com/html/conair/instant-heat-chv14ix/instant-heat-chv14ix_instruction-and-styling-manual_2649558001.webp)
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especial-
ly when children are present, basic safety
precautions should always be followed,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER
To reduce the risk of electrocution:
1. Always unplug this appliance immediately
after using.
2. Do not use while bathing.
3. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
4. Do not place in or drop into water or
other liquid.
5. Do not reach for an appliance that has
fallen into water. Unplug immediately.
WARNING
To reduce the risk of burns, electrocution,
fire, or injury to persons:
1. An appliance should never be left
unattended when plugged in.
2. Do not pull, twist or wrap line cord
around appliance.
3. This appliance should not be used by,
on, or near children or individuals with
certain disabilities.
4. Use this appliance only for its intended
use as described in the manual. Do not use
attachments not recommended by Conair.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped or dam-
aged, or dropped into water. Return the
appliance to a service center for exami-
nation and repair.
6. Keep the cord away from heated surfaces.
7. Never block the air openings of the
appliance or place it on a soft surface, such
as a bed or couch, where the air openings
may be blocked. Keep the air openings free
of lint, hair, and the like.
8. Never use while sleeping.
9. Never drop or insert any object into any
opening or hose.
10. Do not use outdoors or operate where
aerosol ( spray ) products are being used
or where oxygen is being administered.
11. Do not use an extension cord with this
appliance.
12. Do not touch “metal radiator strips”
that hold rollers, as they will be hot.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
How to Operate your Hairsetter:
1. Place hairsetter on a firm, flat surface.
With the lid closed, plug cord into outlet.
This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit into a polarized out-
let only one way. If the plug does not fit fully
into the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. Do not
attempt to defeat this safety feature.
2. Once plugged in, turn the unit on by sliding
the switch to the on position. The red light will
go on, the rollers will heat up quickly and the
ionic energy will be automatically activated
(please refer to HOW TO CURL YOUR HAIR
for further instruction).
3. Allow rollers to heat with lid closed, as
this will provide the fastest, most efficient
heat-up. Once the rollers are hot, you can
begin setting your hair. Allow rollers to
heat longer for tighter curls. Never leave
your hairsetter on and unattended. Always
unplug the hairsetter when not in use.
Allow the hairsetter to cool down after use,
and store in a safe place.
4. Hair should be clean and dry or slightly
damp – never wet when setting.
USER MAINTENANCE
Your hairsetter is designed for household
use and is virtually maintenance-free. This
product represents the highest standards of
workmanship and engineering research.
If cleaning becomes necessary, disconnect
the appliance from the power source. Allow
the setter to cool. Clean the unit and the heat-
ing posts with a cloth. (Occasionally you may
want to clean your rollers. Use a damp cloth
and mild detergent or soap.) If any abnormal
condition occurs, unplug the hairsetter, allow
it to cool, and return it to an authorized serv-
ice representative for repair.
STORAGE
Allow hairsetter to cool. Handle cord carefully
for longer life; avoid jerking or straining at
plug connections. Place hairsetter out of
reach of children in a safe, dry location.
HOW TO CURL YOUR HAIR
1. Place ends of hair on
roller and wind toward the
scalp. Roll up hair firmly,
and secure clip, crossing
over roller. Do not place clip
in roller slit.
2. The firmness of the curl
is regulated by the tempera-
ture and the length of time
the roller is left in your hair.
3. For tight, firm curls,
leave rollers in the hair for at least ten min-
utes before removing. For soft, wavy curls,
the rollers should be removed from the hair
after a shorter period of time.
4. Removing roller:
hold roller in one hand
while removing clips
with the other. Gently
drop roller (DO NOT
PULL) and let curl
bounce back after
roller has been com-
pletely removed. Let cool for one minute for a
firmly set curl, and then style your hair into a
look that lasts for hours.
IMPORTANT:
After using the hairsetter sever-
al times, you will find the best timing for the
texture of your hair and for the result you
desire.
THE IONIZING FUNCTION GENERATES
NEGATIVE IONS THAT CAN:
• neutralize positive charge on
flyaway, frizzy hair
• eliminate static electricity
• contribute to shine
The Ceramic Dual Ionic Port System with
Ceramic Layered Technology Rollers
Soft
Flocking
Layer
Ceramic
Thermal
Layer
Aluminum
Heating
Core
04PC2450 CHV14IX IB 7/19/04 3:37 PM Page 1