Hako Scrubmaster B45CL
1.
Disconnect mains plug of the charger from outlet and fasten to holder
1
.
2.
Fill the clear water tank after folding up the opening
2
. Control the filling level
by the filling level indication
3
.
3.
Switch the machine on by the key switch
4
. All aggregates are in standby.
4.
Use lever
5
to lower squeegee
14
.
5.
Use pedal
6
to lower brush head.
6.
Adjust driving direction with switch
10
and speed with potentiometer
11.
7.
Pull the bail
7
of the bailsystem. Brush head drive and suction turbine
switches on.
8.
Use switch
9
to adjust the water ( if necessary )
NOTE! Make sure that pad / brush is installed!!!
OPERATION:
Qualified persons only are authorised to operate the machine!
The machine is not designed for coarse material! Floor area sweeping before!
Use only cleaning agents suitable for automatic machines ( low-foaming )!
Please pay attention to the informations in the instruction manua!
