![background image](http://html1.mh-extra.com/html/gumdrop/bumptech/bumptech_installation-manual_2278791001.webp)
INSTALLATION
2
Press the other side of the keyboard down
to snap into the right side clip securely.
3
Slide the keyboard forward until it is flush
with the front edge of the case.
4
Close the device screen and carefully press the
rear corner clips to snap onto the keyboard.
5
Align the top edge of the device with the case’s
upper side clips. Slide the top case down until the
device is flush with the top edge.
1
Slide the device keyboard under the bottom case’s
left side clip.
6
Press the lower side clips over the device,
with pressure from both sides, to snap
into place securely.
GumdropCases.com
7
Close the case and press on the rear clips along the back
edge of the top case. Make sure all clips are securely
attached.
*Case may have a 3rd clip at the center
Congratulations on your new case!
BumpTech