GZDM Doorkit application instructions
Required tools:
Ÿ
Damping roller (e.g. GZDR 1000)
Ÿ
Cutter and scissors
Ÿ
Working gloves
Ÿ
Grease cleaner and fabric
Ÿ
Mechanic tools for disassembling the door trim
Attention!
As a precaution, always wear working gloves to protect your hands
from injury when cutting and applying the damping materials!
Step 1: Disassemble the door trim to uncover the panel surface*
Step 2: Clean the surface of the door panel from grease, grime, silicone and wax -
remaining grease reduces the adhesive force of the damping material!
Step 3: Cut the anti-vibrating GZDM 3750AB-SILVER (8 sheets included) to tting piece
Step 4: Loosen the carrier layer and stick the tting pieces to the cleaned door panel
