Page 1
Grizzly Bandsaw SOP
This Bandsaw runs on 220V (208V really because, 3 phase power).
Set blade guide rollers to appropriate height for the piece you are
cutting.
The rollers should be close to your piece.
Keep hands and fingers away from blade, use push sticks and/or T-
square pusher.
Be very careful while resawing and use a push stick.
The off button has to be twisted to reset itself.
Please read the next 14 pages of this guide to gain an understanding of
the operation of the Bandsaw itself.
The full manual is available online and a paper copy is here in the shop.
