LED WALL PACK LIGHT INSTRUCTION
Application:
Available in tunnel (except for motor vehicle tunnel), workshop,
warehouse, factory, house, building exterior, etc.
Cautions:
1. Can not use the electric generator to test the LED lamp.
2. Please abide by related country, regional and local law and
regulations when install this fixture.
3. Please turn off the power before installation or maintenance.
4. Proper earth grounding is required to ensure safety.
Notice:
1. To avoid possibility of electrical shock or fire, the installation
personnel must have professional electric knowledge.
2. Please wear gloves to avoid injury before installation.
3. If any smoke or spark of the wire happened, please turn off the
power immediately and notify relevant personnel.
Attention:
1. Please check if there is any damage during shipping.
If so, please contact manufacturer timely.
2. Please read the installation instruction carefully to check whether
all the accessories are complete. After confirmation, then install the
fixture according to installation steps.
5 different outlets are available for driver wire, see below picture.
Wiring Diagram:
GreentekEnergySystems.com
Notice:
All 3 installation methods meet UL requirement. The first
installation method meets DLC requirement if fixtures are
installed wihtout adjusting viewing angle. The second and third
installation methods do not meet DLC requirement.
This product is available with photocell. Installations remain the
same with or without it.
Standard wire
L/live wire: Black\Brown
N/null wire: White\Blue
Ground wire: Green\Yellow-green
Warning/Arertissement:
MIN 75ºC SUPPLY CONDUCTOR
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE
WITH THE APPLICABLE INSTALLATION CODE BY A
PERSON FAMILIAR WITH THE CONSTRUCTION AND
OPERATION OF THE PRODUCT AND THE HAZARDS
INVOLVED
LES FILS D’ALIMENTATION 75ºC MIN
CE PRODUIT DOIT ÊTRE INSTALLÉ SELON LE CODE
D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI
CONNAÎBIEN LE PRODUIT ET SON FONCTIONNEMENT
AINSI QUE LES RISQUES INHÉRENTS.
