Grady-White Boats Freedom 285 Owner'S Manual Download | Manualshive

Page: 1 / 85

background image

Grady-White Boats, Inc.

5121 Martin Luther King Jr. Hwy, Greenville, NC 27834 • P.O. Box 1527 • Greenville, NC 27835-1527

Tel: 252-752-2111 • Fax: 252-752-4217 • http://www.gradywhite.com

Dear Grady-White Owner:

Welcome aboard!

Buying and owning a boat is a very special experience. Of all the many products you’ll ever

own we want your Grady-White experience to be the absolute best. That means providing the
descriptions, explanations and technical support that you need to enjoy your Grady-White with
confidence and security.

Your Grady-White exceeds all US Coast Guard safety standards and is built to standards

certified by the National Marine Manufacturers Association (NMMA). Best of all, your boat is
built to Grady-White standards, standards that have served our owners through some truly
extraordinary conditions since our first models built in 1959.

The seaworthiness and safety of your Grady-White is highly dependent on the operation,

maintenance and care of your boat, so please read this manual thoroughly and keep it around for
reference. If you need further explanation or “hands-on” help, don’t hesitate to ask the people at
your Grady-White dealership; they have experience with the systems and operations of your boat.
If for any reason you need additional help, please feel free to call us at the factory. We sincerely
want to provide you with the help and information that will make your Grady-White experience
delightful.

Thanks for choosing a Grady-White. All of us at the factory and at your dealership are

dedicated to earning your confidence in Grady-White Boats. Again, welcome aboard.

Sincerely yours,

Kris Carroll

President

Grady-White Boats, Inc.

1
2
3
...
»

Summary of Contents for Freedom 285






















































































Reviews:

No comments

Related manuals for Freedom 285

Brand: Laser Pages: 15

Brand: Jeanneau Pages: 100

Jeanneau International 50

Brand: Sienne Pages: 16

Brand: Laser Performance Pages: 10

Brand: TAKACAT Pages: 3

Brand: Maxxon Pages: 6

Brand: Cobalt Digital Inc Pages: 130

Brand: White Formula Pages: 23

Brand: RIOT Pages: 7

Quicksilver 200 Tendy Slatted

Brand: Mercury Pages: 63

Brand: Jeanneau Pages: 46

MERRY FISHER 855 OFF SHORE

Brand: Jeanneau Pages: 108

Turbojet J/T 285

Brand: Williams Pages: 23

Brand: Vanguard Pages: 12

GP1300R WaveRunner 2003

Brand: Yamaha Pages: 279

Brand: Vanguard Pages: 31

Brand: BENETEAU Pages: 70

Brand: Sea-doo Pages: 20

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands