Mod. IO 09/I Rev. 01
AUTOMATIC BARRIER
GR4000 – 6000
USER MANUAL
Congratulations on your excellent choice. Your new
electromechanical gear motor is manufactured in compliance with
high levels of quality and reliability; this will guarantee performance
and safety over time.
Enclosed with this booklet, you will find all the information necessary
for assembling your gear motor and ensuring your safety.
THERE IS NO REPLACEMENT FOR CAUTION IN ANY CASE AND
THERE IS NO BETTER RULE IN ORDER TO PREVENT
ACCIDENTS.
All our products are manufactured in compliance with standards in
force.
This instruction booklet is exclusively designed for
professional installers
who are experts in the manufacturing criteria
and the safety and protection devices against accidents for gates,
doors and power operated gates (respect standards and laws in
force).
The installer must provide suitable explanations and issue the
final user with an instruction booklet in accordance with EN 12635.
Before proceeding with installation, the installer must analyse
the risks of final automated closing and ensure that the whole system
is in safe conditions (in compliance with the EN 12453 and EN 12445
standards).
The various electrical components which make up the
automated closing system (e.g. photocells, flashing lights etc.) must
be wired in compliance with EN 60204-1 and the modifications to this
in point 5.2.2 of EN 12453.
Any operation to repair or adjust the equipment is forbidden
unless all due precautions in order to prevent possible accidents have
been taken (e.g. electrical power disconnected, motor blocked). All
moving components must be equipped with suitable protection
devices.
The power line must be protected for the maximum current
when the rotor is blocked.
All repair operations must be performed by qualified personnel.
Keep the automatism commands out of the reach of children.
The commands must be installed at a minimum height of 1.5 m from
the ground and out of the radius of action of moving parts.
Only activate the remote control when the automatism is
visible. All command operations must only be carried out at points
where the automation is completely visible.
Any arbitrary modification to this product releases GR Sistemi
Automatici di Apertura Srl from all responsibility resulting from
damage or injury to objects, persons or animals.
Disregarding the safety standards listed herein and the
regulations in force releases GR Sistemi Automatici di Apertura Srl
from all responsibility resulting from damage or injury to objects,
persons or animals.
Keep this manual safely in a suitable place known to all
persons involved.
The automation must be coupled with a control unit equipped
with torque adjustment which provides an intrinsic crush-prevention
safety device as referred to in the EN 12453 – EN 12445 standards.
Only activate the remote control when the automatism is
visible. All command operations must only be carried out at
points where the automation is completely visible.
Any arbitrary modification to this product releases GR
Sistemi Automatici di Apertura Srl from all responsibility resulting
from damage or injury to objects, persons or animals.
Disregarding the safety standards listed herein and the
regulations in force releases GR Sistemi Automatici di Apertura
Srl from all responsibility resulting from damage or injury to
objects, persons or animals.
Keep this manual safely in a suitable place known to all
persons involved.
The automation must be coupled with a control unit
equipped with torque adjustment which provides an intrinsic
crush prevention safety device as referred to in the EN 12453 –
EN 12445 standards.
SAFETY RULES
While installing/using the automation, follow the safety rules
listed below with great care:
Safe distance!
Moving mechanisms!
Do not install the automation in environments which
are saturated with explosive mixtures!
Electric shock!
Use gloves!
Use welding goggles!
Keep the protective cover on!
MAINTENANCE
Before every maintenance intervention, disconnect power
using the ON/OFF switch and lock it in the OFF position using a
padlock.
The equipment must be maintained in order to conserve
the conditions which guarantee safety and correct operation.
Always use original spare parts.
Do not perform interventions which modify the machine.
A modified machine requires a new CE marking.
Adjustments to the operation of the automatism must be
carried out by specialised personnel in compliance with reference
standards. During these operations, the presence of two
operators is required.
