background image

Extra shelves are also available (RXHS-wwdd).

LOAD CAPACITIES  

LOAD CAPACITIES  
PER SHELF LEVEL*

PER SHELF LEVEL*

36w x 18d
36w x 24d 
48w x 18d 
48w x 24d 
60w x 24d

4000 lbs.
4000 lbs. 
4000 lbs. 
4000 lbs. 
3250 lbs.

UNIT SIZE

UNIT SIZE

WT. CAPACITY

WT. CAPACITY

*Total Unit Capacity not to exceed 13,000 lbs.

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

Heavy-Duty Reinforced High Capacity Shelving

    36” Wide, 46” Wide & 60” Wide Units

 Global Industrial, 111 Harbor Park Dr., Port Washington, NY 11050 • (800) 645-1232 • [email protected]

GENERAL SAFETY INFORMATION

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling various pieces to avoid injury. 

For safety, wear a pair of work gloves when assembling or performing any maintenance on the unit.

Summary of Contents for RXHS-361872

Page 1: ...FUTURE REFERENCE RETAIN INSTRUCTIONS FOR FUTURE REFERENCE ASSEMBLY INSTRUCTIONS PARTS MANUAL Heavy Duty Reinforced High Capacity Shelving 36 Wide 46 Wide 60 Wide Units Global Industrial 111 Harbor Park Dr Port Washington NY 11050 800 645 1232 service globalindustrial com GENERAL SAFETY INFORMATION GENERAL SAFETY INFORMATION Some parts may have sharp edges CARE must be taken when handling various p...

Page 2: ... No 2 one at the top and one at the bottom Be sure the supports are fully seated in the slots Repeat to construct a second unit end 2 Next connect the two unit ends with two LRA left to right shelf supports Ref No 3 temporarily leaving off one of the top left to right supports NOTE It is important that one top left to right support be temporarily left off in order to later insert the upper shelves...

Page 3: ...front and rear of each shelf This requires two bolts per shelf 7 Attach the remaining shelf supports and decking at the desired shelf levels completing one level at a time NOTE Once all but the top shelf are in place attach the remaining left to right shelf support at the top level 8 After attaching the top decking and securing it with two sets of bolts your die rack unit is fully assembled and re...

Page 4: ... for replacement purposes REF REF NO DESCRIPTION NO DESCRIPTION 1 Heavy Upright Post 4 SUR hh SUR hh SUR hh SUR hh SUR hh 2 Front to Back End Shelf Support 10 LRA 18 LRA 24 LRA 18 LRA 24 LRA 24 3 Left to Right Shelf Support 10 LRA 36 LRA 36 LRA 48 LRA 48 LRA 60 4 Front to Back Center Shelf Support 10 SDS 18 SDS 24 SDS 18 SDS 24 SDS 24 5 Steel Decking 5 ZS 3618 ZS 3624 ZS 4818 ZS 4824 ZS 6024 6 1 4...

Reviews: