background image

 

1

030521

        WARNING

To reduce the risk of fire, electrical shock by and/or injury/

damage to persons or property:

• Do not operate the machine unless trained and authorized
• This unit must be plugged into 3-Prong grounded outlet
•  Flammable materials can cause an explosion or fire. 

DO NOT

 use 

flammable materials in tank or as cleaning agent in machine.

•  Flammable materials or reactive metals can cause explosion or fire. 

DO NOT

 use to clean up flammable or combustible spills.

•  This machine is intended for commercial use. It is constructed for 

use in an indoor environment and is not intended for any other use.

•  Extreme caution and supervision is necessary when used near 

children or unqualified personnel

•  Do not operate the Unit if the cord/plug is damaged in any manner.
•  Do not place objects on the Unit or allow objects to obstruct the 

inlet or outlet openings. Do not operate in close proximity to walls, 

curtains, etc.

•  To reduce the risk of electric shock, do not expose unit or power 

cord to moisture.

•  Always turn off and unplug the machine prior to assembling, 

perform ing routine maintenance, or when not in use.

•   The use of attachments or accessories is not recommended or sold 

by the Global Industrial may cause personal injury and/or property 

damage.

• 

 DO  NOT

 attempt to fix the machine by yourself. All repairs must be 

made by an authorized personnel

• Do not modify the machine
•  Avoid moving parts. Do not wear loose fitting clothing while using/

ser vicing the machine

•  Do not put any flammable materials into solution tank. This can 

cause an explosion or a fire. Only use approved cleaning chemicals. 

Contact Global Industrial (

1-800-645-1232

) for recommendations 

on proper Cleaning Solutions.

• Empty the Solution and Recovery tank before storing the machine
• This machine shall be stored indoors only
• Do not operate on incline

Read this manual thoroughly prior to operation or maintenance. 

Keep these instructions in a safe location for future reference. 

For questions, visit globalindustrial.com or contact Customer 

Service at 1-800-645-2982.

TECHNICAL SPECIFICATIONS

Clean Width

17"

Squeegee Width

30.7"

Work Capacity

16000 sq. ft./hr.

Pad Pressure

77 lbs.

Brush RPM

140

Brush Motor

AC110 ~ 230/375

Suction Motor

AC110 ~ 230/375

Solution Tank

9.2 Gallon

Recovery Tank

10.5 Gallon

Machine Dimensions

(Excluding Squeegee)

45" x 19" x 43" (L x W x H)

Cord

12 AWG ST Cord, 82 ft.

with GFCI Plug

Machine Weight

161 lbs.

ORDER YOUR 

CLEANING 

CHEMICALS & 

PADS

Floor Cleaner

Model 640404 (Case of 4) 

Floor Cleaner

Model 640404 (Case of 4) 

Multi Purpose Cleaner/Degreaser

Model 640407 (Case of 4) 

globalindustrial.com

or Call 1-800-645-1232

User's manual

Manual del usuario

Manuel de l'utilisateur

Customer Service

US: 1-800-645-2986

Servicio de atención al Cliente

US: 1-800-645-2986

Service à la clientèle

Canada: 888-645-2986

Model 641410

17" Electric Auto Floor Scrubber

Heavy Duty Cleaner/Degreaser

Model 640406 (Case of 4) 

PADS (Case of 5)

17" Scrubbing Pad

Model 261164GN

17" Buffing Pad

Model 261164RD

 

  

IMPORTANT INSTRUCTIONS

PLEASE READ THE INSTRUCTIONS 

CAREFULLY PRIOR TO USING THIS PRODUCT. 

DO NOT USE EXTENSION CORD

Summary of Contents for 641410
















Reviews: