SHERWOOD
TM
LITTER BIN
1
To Secure a Sack in Position
(Sack Retention Model)
Operator Instruction Leaflet
To Remove and Replace Hood (Sack Retention or Solid Liner Model)
IMPORTANT NOTE: ENSURE THAT ALL RELEVANT PERSONNEL READ THESE INSTRUCTIONS PRIOR TO USE
With the key held in
place, twist the Hood
anti-clockwise
Once twisted, lift the
hood upwards to remove
1.
4.
5.
6.
7.
8.
2.
3.
Insert key into keyhole,
located at the side of the
bin
When replacing the hood,
ensure the fixtures are
aligned with the apertures
on the bin, as shown
When hood is seated, twist
clockwise to lock back into
position
Pull the sack bands
upwards
Pull the sack up from
within the bin, and wrap
over the sack bands
Push the sack bands
back down to secure the
sack
9 .
Use the handles on the Liner
rim to lift the Liner from, or
lower it back into, the bin
To Remove and Replace
Solid Liner
