RQ B SERIES REACTIVE POWER CONTROL RELAY
RQ B Series reactive power control relays are designed to operate for the reactive power compensation of LV distribution systems .
The logic to operate the steps is completely different from other relays. The logic is designed so that the compensation is achieved
very quickly with most reliable operation.
Figure 1
Basic Properties:
* Automatic or manual setting of
c/k
* Set
C o s ø is adj u s t a b l e b et w e e n 0,90 a n d 0,99
* Re-connection or Re-isolation periods are adjustable
independently
* Selection of number of steps,
* 6 different sequence logic,
* Reactive / Active power ratio is displayed on the screen,
* Under voltage, over voltage and
compensation failed alarms,
* Easy programming,
* Harmonic free operation,
* Easy installation with socket mount
* Automatic polarity sensors,
SETTINGS
Relay should be set properly according to the properties of the systems. In order to achieve best relay operation, all settings should
be done properly and the oeration of all signal leds must be read carefully. The front view of the relay is at Figure 1.
1-C/k Setting:
Press Set button until “c/k” led is on .
Set
c/k
value to the desired value using up or down buttons
Pr e s s S e t
button again and c/k value will be stored in the memory and Set
C o s ø
led will be on.
set
set
