background image

Summary of Contents for Oven

Page 1: ...nd or hang on the oven door This appliance must be supplied with the proper voltage and frequency and connected to an individual properly grounded branch circuit protected by a circuit breaker or fuse having amperage as noted on rating plate Rating plate is located on oven frame We recommend you have the electrical wiring and hookup of your oven done by a qualified electrician After installation h...

Page 2: ...ocation H Overall Height W Overall Width 24 22 1 2 27 1 2 Min 28 1 8 Max 23 1 2 Min 32 1 2 28 3 16 23 3 4 MIN Fig 2 DOUBLE OVEN NOTE Locate an approved junction box in the suggested location a minimum of 48 above the runners Be sure the oven support is solid enough to support 155 pounds Also be sure the oven support is level and straight There is no way to level the oven after Installation If a so...

Page 3: ...gauge alone When connecting to a 3 conductor branch circuit ff local codes permit connect the range bare conductor with the crimped neutral white lead to the branch circuit neutral white or gray in color the range red lead tO the branch circuit red lead and the range black lead to the branch cireuit black lead in accordance with local codes When installing in a new construction or When installing ...

Page 4: ...e Coverthe binges withtoweling or emptytowel roils while workingIn the ovenarea Put the oven into the cabinet and use a 1 8 drill bit to drill holes in the cabinet front through the holes in the oven trim Secure the oven in the cabinet with the screws provided The lower trim should be mounted to the bottom of the oven frame with the 3 screws provided I _ Thetrimprovidescoolingair enttylnto cabinet...

Reviews: