background image

Safety Instructions   

2-5

Installation Instructions 

6-20

Electric Dryer 

  

• • • • • • • • • • • • • • 

6-12

Gas Dryer 

  • • • • • • • • • • • • • • • • • 

13-19

Reversing the Door  

• • • • • • • 

20

 

Operating Instructions 

21-25

Control Panel  

• • • • • • • • • • • • • • • 

21, 22

Control Settings  

• • • • • • • • • • • • • 

 23

Dryer Features  

• • • • • • • • • • • • • •

 24

Loading and Using the Dryer    25

Troubleshooting Tips   

26 , 27

Consumer Support 

 

29, 30

Consumer Support  

• • • • • • • • • • 

 30 

Warranty  

• • • • • • • • • • • • • • • • • • •

 29

Dr

yer

s

Note to Consumer:

This  product  was  verified  to  be 

in excellent condition when it left 

our manufacturing facility.  If it 

has been damaged during transit 

or installation, please report that 

damage immediately to the Retail 

Outlet where it was purchased.  

Although your warranty covers 

manufacturing defects in material 

or workmanship, it does not 

include coverage for delivery 

damage.  Please refer to your 

warranty  section  for  specific 

information about warranty terms 

and conditions.

Use and Care

With Installation Instructions.

500A292P014 Rev.0

Write the model and serial 

numbers here:
Model#
Serial #

They are on the label on the 

front of the dryer behind the 

door.

www.GEAppliances.ca

Summary of Contents for MTMX100EM





























































Reviews: