![background image](http://html.mh-extra.com/html/ge/bt22-series/bt22-series_installation-manual_128051001.webp)
Installation Guide
imagination at work
(For BT22 Series of CE version)
LED Luminaires
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Save These Instructions
Use only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.
Tools and components required:
• Phillips head screwdriver.
• UL approved conduit fitting.
• UL approved twist-on wire connectors.
Prepare Electrical Wiring
Electrical Requirements
• LED driver must be supplied with 220-240
VAC, 50/60
Hz and connected to an individual properly grounded branch circuit,
protected by a 15 or 20
ampere circuit breaker. Use Min. 75
°C supply conductor.
Grounding Instructions
• The grounding and bonding of the overall system shall be done in accordance with National Electric Code (NEC) Article 600
and local codes.
WARNING
RISK OF ELECTRIC SHOCK
•
Turn power off before inspection, installation or removal.
• Properly ground electrical enclosure.
RISK OF FIRE
• Follow all NEC or IEC and local codes.
• Use only UL or IEC approved wire for input/output connections.
Minimum size 18 AWG (0.75 mm
2
).