background image

I

MPORTANT RECEIVING INSTRUCTIONS: Visually inspect all components for shipping damage. If any shipping damage 

is found, notify carrier at once. Shipping damage is NOT covered by warranty. The carrier is responsible for all repair or
replacement costs resulting from damage in shipment.

To prevent injury keep hands away from the punch and die while punching holes. Always wear 
approved eye protection.

Avoid dropping the cylinder. During punch operation, support the cylinder to prevent it from 
falling after punching is completed.
To prevent thread damage, be sure punch is threaded onto the stud until the stud extends 
beyond the punch. Make sure all rods, studs and punches are secured before operating 
hydraulic driver.
Do not operate near live circuits. Contact with live circuits can cause injury or death.
Never exceed rated capacity of the tool. Use this tool for its intended use only.
Never operate the pump lever after the ram motion stops. Continued operation after ram motion 
stops will damage driver and could result in injury.

Gardner

Bender

Instruction

Sheet

Slug-Out 90

TM

I

MPORTANT — USER SAFETY AND PROTECTION: In setting up systems to fit your operations, care must be taken to

select the proper components and design to insure appropriate integration with your operations and existing equipment and 
that all safety measures have been taken to avoid the risk of personal injury and property damage from your application 
or system.
GB ELECTRICAL CANNOT BE RESPONSIBLE FOR DAMAGE OR INJURY CAUSED BY UNSAFE USE, MAINTENANCE
OR APPLICATION OF ITS PRODUCTSPlease contact GB Electrical for guidance when you are in doubt as to the proper
safety precautions to be taken in designing and setting up your particular application.

!

WARNING

To Protect Your Warranty, Use Only Enerpac Hydraulic Oil.

Slug-Out 90

TM

1

2

” - 2” Self-contained Right-angle Hydraulic Knockout Set

Features
•  Four-point punches for easy slug removal.
• Right-angle head swivels 360

o

for flexible punching 

in tight work spaces.

•  Punches up to 2

1

2

” conduit sizes in up to 12-gauge 

stainless or 10-gauge mild steel.

•  Compact, lightweight size: 7

1

2

pounds and 13” long.

• Operating pressure rated at 10,000 psi.

Model Description

KLP6 Hydraulic 

Driver

KPR7520 Pull 

Rod

KPS50 Pull 

Stud

KSA50 

Pull Stud Adapter

Z88010 Storage 

Case

KP500B 

1

2

” Punch

KD500B 

1

2

” Die

KP750B 

3

4

” Punch

Model Description

KPD750B 

3

4

” Die

KP1000B 1” Punch
KD1000B 1” Die
KP1250B 1

1

4

” Punch

KD1250B 1

1

4

” Die

KP1500B 1

1

2

” Punch

KD1500B 1

1

2

” Die

KP2000B 2” Punch
KD2000B 2” Die

Note: Inspect tool and components for wear & damage. Replace worn, damaged, or missing components with genuine 
GB replacement parts. To ensure ease of assembly & operation, keep all threads clean & lightly oiled.

KOS5290 Kit Components:

RPS-0129  3/29/00 11:11 AM  Page 1

Reviews: