Angled
Aluminum
Hinge
Bars
Gate installation
Parts Needed:
1.
Attach wall-brackets to existing walls with appropriate anchors for your wall-type.
• Be sure the paw-prints are at the TOP
2.
Attach hinge-bars to the angles.
• One paw-print will be at the top - the other will be at the bottom.
(depending on which side of the angle you chose to have the hinge on)
• Use ¼-20x¾” pan-head screws, lockwasher, and washer to bolt hinge-bars to angle.
There will be two holes at the bottom and two holes at the top of the angle that will not be used - yet.
W
a
ll
W
a
ll
¼“ Lock
Washer
¼“ Flat
Washer
¼-20 x ¾”
Pan-head screw
Paw-prints
Page 1 of 4
Gator Kennels Gate-only assembly instructions
