background image

Product Use Criteria:

• Pump only clean, dry air.

• Operate at 32

º

F - 104

º

F (0

º

C - 40

º

C).

• Protect unit from dirt & moisture.

• Do not pump flammable or explosive gases or

use in an atmosphere that contains such gases.

• Protect all surrounding items from exhaust air. This

exhaust air can become very hot.

• Corrosive gases and particulate material will

damage unit. Water vapor, oil-based contaminants

or other liquids must be filtered out.

• Consult manufacturer before using at high

altitudes.

• Oil-Less rotary-vanes require NO lubrication.

• Sealed bearings are grease packed.

• Use of petroleum or hydrocarbon products will

reduce carbon-vane service life.

Thank you for purchasing this product. It is manufactured to the highest standards

using quality materials. Please follow all recommended maintenance, operational

and safety instructions and you will receive years of trouble free service.

PART NO. 70-299

G379 (REV-C)

AT03-AT05 SERIES OILLESS

COMPRESSORS

O

PERATION

& M

AINTENANCE

M

ANUAL

WARNING

PLEASE READ THIS MANUAL COMPLETELY BEFORE INSTALLING AND USING

THIS PRODUCT. SAVE THIS MANUAL FOR FUTURE REFERENCE AND

KEEP IN THE VICINITY OF THE PRODUCT.

www.gastmfg.com

ISO 9001 & 14001 CERTIFIED

®Registered Trademark/™Trademark of Gast Manufacturing Inc., Copyright © 2002 Gast Manufacturing Inc.  All Rights Reserved.

Summary of Contents for AT03 Series









Reviews: