background image

The following 

fi

 les have been archived under the aboce ARCHIVE FILENAME.

Filename 

  File 

Contents

Date:

Drafter:

Checker:

Project Engineer:

Released By:

TITLE:

PART NO:

SIZE

A

Scale:

N/A

REV.

Page        of

REVISIONS

SPECIFICATION
CONTROL
DRAWING

 REV.    DATE   

 

        DESCRIPTION 

 

 

           ECO NO.

Garmin Ltd. or its subsidiaries

c/o Garmin International, Inc.

1200 E. 151st Street

Olathe, Kansas 66062 U.S.A.

CONFIDENTIAL

This drawing and the speci

fi

 cations contained herein are the property of Garmin 

Ltd. or its subsidiaries and may not be reproduced or used in whole or in part as 

the basis for manufacture or sale of products without written permission .

30

190-00286-01.pdf 

190-00286-01.pdf

     

190-00286-01

GWX 68 Installation Manual

1

  1          36

GWX 68 Installation Manual

5

        

      

                   

     

      

    

 1       5/12/05      Preliminary Release 

 

 

 

          ---------

NOTES:
1. DESCRIPTION:  Installation Documentation - 
2. PAGE SIZE:  

Letter: Width = 8.5 inches, Height = 11 inches  

 

 

 

Tabloid: Width = 11.0 inches, Height = 17.0 inches

3. PAGINATION:     double-sided letter sheets.     

single-sided tabloid sheets.

4. MATERIAL:  24 pound bond.  Approved equivalents allowed.
5. COLOR:  Black Ink on White Paper Stock. 
6. BINDERY:  Three-hole punch, shrink-wrap. Digital output preferred
7. FOLDS:  Z-Fold tabloid sheets at end of document.
8. ELECTRONIC ARTWORK: Shall Conform to Garmin Archive, Filename: 

 

Portable Document Format, contains Installation Manual and Release Speci

fi

 cation

release.indd 

Adobe InDesign Format, Release Speci

fi

 cation

Manual Elements 

Word 97 for PC, Formatted Files and Figures

*.* 

Various supporting illustrations, drawings, and artwork. 

 

 

8.5"

11"

3-Hole 
Punch

GWX 68

Installation Manual

DER REVIEW REQUIRED

Summary of Contents for GWX 68





































Reviews: