background image

41cc Petrol Chainsaw

Contents

 

Overview  

 

     

04

 

Utilisation  

 

     

05

 

Contents of box  

     

06

 

Explanation of symbols  

    

12

 

Introduction  

 

     

15

 

Layout  

       

16

 

Scope of delivery  

 

    

16

 

Intended use  

 

     

17

  

Safety regulations  

 

    

18

 

Set up  

 

      

34

 

Operation  

 

     

37

 

Cleaning  

 

     

41

 

Maintenance and servicing  

 

   

42

 

Technical data  

 

     

49

 

Storage  

      

51

 

Transport  

 

     

51

 

Disposal and recycling  

 

    

52

 

Troubleshooting  

 

    

52

 

Declaration of Conformity  

 

   

55

Original instruction manual

Vers.No. 161013

MODEL:  CSP41  PRODUCT CODE:  64055    04/2017

AFTER SALES SUPPORT

 

 

 

00800 4003 4003

 

[email protected]

Great care has gone into the manufacture of this product and it should

therefore provide you with years of good service when used properly. In

the event of product failure within it´s intended use over the course of

the fi rst 3 years after date of purchase, we will remedy the problem as

quickly as possible once it has been brought to our attention. In the

unlikely event of such an occurrenece, or if you require any information

about the product, please contact us via our helpline support services,

details of which are to be found both in this manual and on the product

itself.

PRODUCED IN CHINA FOR:

ALDI STORES LTD., PO BOX 26, ATHERSTONE,

WARWICKSHIRE, CV9 2SH.

ALDI STORES (IRELAND) LTD.

PO BOX 726, NAAS, CO. KILDARE.

Visit us at www.aldi.com

Summary of Contents for CSP41






















































Reviews: