background image

1-800-876-5520 • gardeners.com

[email protected]  

8% of our profits

 go back to our communities.  

Learn more at gardeners.com/

FoRCE-FoR-GoOD

1332V  Rev 11/19

#8599042, 8599043

Gothic Arch & Gothic Arch Connectors

Important

Assembly is different depending on how many Arches you’re connecting together. If you are connecting 2 or more Arches, it is 
easiet to install them all at once rather than adding on later. 

Assemble your Arches where you intend to install them.

 Select a location that is protected from high winds and is away from 

children’s play areas. 

NOTE: 

Because the Arch is heavy, we recommend securing it in concrete. If you are installing it directly into the 

ground, please make sure your soil is firm.

Assembly

One Arch
Parts List

(2) BOTTOM SIDE PANELS (holes at the top)
(2) TOP SIDE PANELS (holes at the top and 
bottom)
(2) CURVED PANELS
(2) TOP CURVED PANELS
(14) PLATES
(28) SHORT BOLTS & NUTS
(2) LONG BOLTS & NUTS
WRENCH

Tools required

Stepladder

NOTE: 

Assembly requires at least 2 people. 

1. 

 Slide the pieces of the Arch together on 

the ground as shown in 

Fig. 1

. Line up 

the holes in the TOP CURVED PANELS and 
attached them using the LONG BOLTS & NUTS. 

2.  

Attach 7 PLATES to one side of the ARCH using the SHORT BOLTS & NUTS (

Fig. 2

). 

3.

  With at least two people, carefully lift the Arch so it is upright. Attach the remaining 7 PLATES to the other side of the Arch (

Fig. 2

). 

Use the WRENCH to make sure all of the NUT & BOLTS are tightened into place.

4.

  

Straighten the sides of your Arch, then press the ends of the BOTTOM SIDE PANELS into the ground, marking it. Move the Arch to 

the side and use your rubber mallet to gently pound the STAKES into the marked spots. Place the open ends of the Arch over the 
tops of the STAKES.  

 

 

 

 

 

 

 

 

       

 

             

over please

Figure 2

Attach PLATES to the 
14 spots pointed out

PLATE

SHORT 
BOLT

SHORT 
BOLT

NUT

NUT

One Arch

Two Arches with  

1 set of Connectors

Three Arches with  

2 sets of Connectors

BOTTOM SIDE PANELS

TOP SIDE PANELS

CURVED PANELS

TOP CURVED PANELS

Figure 1

insert LONG BOLTS & NUTS 
through lined up holes here

Reviews: