background image

 

 

 
 

Pea Tunnel Instruction Manual 

G4460 

 

General information and safety warnings 

 

Ensure that you have all parts present prior to assembly. 

 

Do not load on top of the tunnel.  

 

Do not allow children to play on or in the tunnel. 

 

Not suitable for commercial purposes. 

 

Assemble on a flat surface and in the area that you wish to place your 
tunnel. 

 

Position in a sheltered bright place out of direct strong winds 

Parts list 

4 x arches  
8 x staked supports  
14 x cross supports  
15 x metal inserts  
28 x sure-clips  
16 x net clips  
1 x netting 

Assembly 

Note:

 Assembly is easiest with two people. 

1.

 

Ensure that you have all parts listed and lay them out on a flat, clean 
surface. 

2.

 

Attach the 2 cross supports together using the metal inserts. Repeat 
until you have 7 assembled cross supports. 

 

 

 

3.

 

Stand the arches upright and place an assembled cross support along 
the top of them. Spread the arches apart so that they are evenly 
spread out.  

4.

 

Attach 3 cross supports to the arches, using the sure-clips. 

 
 

 

 

Summary of Contents for G4460

Page 1: ...strong winds Parts list 4 x arches 8 x staked supports 14 x cross supports 15 x metal inserts 28 x sure clips 16 x net clips 1 x netting Assembly Note Assembly is easiest with two people 1 Ensure that you have all parts listed and lay them out on a flat clean surface 2 Attach the 2 cross supports together using the metal inserts Repeat until you have 7 assembled cross supports 3 Stand the arches u...

Page 2: ...owards the inside of the pea tunnel 5 Carefully rotate the frame onto its side and connect each arch with the staked supports using the metal inserts Carefully rotate the frame back upright 6 Attach the 4 remaining cross supports to the newly attached staked supports 7 Carefully unfold the netting and spread it over the frame Loop the netting into the hooks on the ends of the cross supports ...

Page 3: ...s along the sides of the frame to secure the netting Press down on the tab in the back of the clips to lock them into place 9 Press the ground pegs into the ground as far as possible around 12 14 inches to make sure it s secure ...

Page 4: ...does not affect your statutory rights If your product fails due to a defect in material or workmanship during this period please return it to the place of purchase Normal wear and tear is not covered under the guarantee Any guarantee is invalid if the product has been misused or subject to neglect or an attempted repair other than by our own service centre Due to continuous product improvement we ...

Reviews: