![background image](http://html1.mh-extra.com/html/gamber-johnson/recon-cf31-military/recon-cf31-military_installation-instructions-manual_3390516001.webp)
INSTALLATION INSTRUCTIONS
Product
Revision
Form
7160-0377
Recon CF31 Military Docking Station
Rev. A
INST-578
Printing Spec: PS-001
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
© copyright 2010 Gamber-Johnson, LLC
This document is for the following
products:
7160-0377 = Recon CF31 Military
Docking Station.
The dock will hold a Panasonic CF30 or
CF31 computer. A CF29 computer can
be mounted with the addition of a .06"
shim under the front hook.
*This document is for the docking station only. For instructions on features, set-up and operation
of the CF31 computer, please refer to the manuals provided by Panasonic with the computer.
** This docking station is designed to be used with a variety of Gamber-Johnson mounting
systems. Installation instructions for other Gamber-Johnson products are provided with each
individual product.
IMPORTANT SAFETY INFORMATION for
INSTALLERS
Safety is dependent on the proper installation and servicing of this docking station. It is
important to read and follow all instructions before installing this product.
To properly install a Gamber-Johnson docking station you must have a good understanding
of automotive electrical procedures and systems, along with proficiency in the installation
and service of aftermarket vehicle equipment.
There are no adjustments required at any time of the electrical components within the
docking station.
Opening the port replication housing will void the product warranty.