USER MANUAL
– EN
SV16300 Kick Scooter Galaxy Calypso
SV16304 Kick Scooter Galaxy Zenit
ASSEMBLY
Check that all parts are present:
(1 pcs) main scooter frame with front fork.
(2 pcs) braking mechanisms (may vary depending on type).
(2 pcs) inflating wheels (may vary depending on type: 2x12
” or 1x16” and 1x 12”).
(1 pcs) handlebars including stem (see. Picture 1).
Entrust the assembly to specialized service.
Loosen the nuts on the front wheel hubs. If necessary, adjust the bearings on the axles so that the
wheels rotate freely (i.e., the wheels cannot be stiff or too loose). Insert the wheel into the front fork of
the scooter and tighten the nuts.
Attaching the handlebars: turn the stem down (if it is up, adjust the rotation and tighten evenly the 4
stem bolts (see. Picture 2).
If the stem is not connected and is placed separately, connect it to the handlebars and then tighten
evenly the 4 stem bolts (see. Picture 2).
