![background image](http://html1.mh-extra.com/html/galaxy-audio/edx/edx_quick-start-manual_3258527001.webp)
GAL A X Y AUDIO
Quick Start Guide
EDX
Wireless Microphone System
Included Components
1.
EDX Receiver x1
3.
Power Supply x1
4.
Quick Start Guide x1
2.
1/4" Cable x1
1.
2
3
2
Setup
1
With the transmitter for channel 1 turned
on, place the transmitter with it’s IR
window facing the receiver IR window,
about 6" away.
3a
When the transmitter is synced, the red
RF light on channel 1 will illuminate.
When talking into the microphone the
green AF light will illuminate.
3
4.
2.
Insert the 5.5 mm plug into the DC
input jack, then plug the wall wart into a
120VAC outlet.
Press the “Select” button on channel 1
to choose a frequency number of 0-9
or A-F.
Make sure the receiver is powered on.
(Powers on immediately when power
supply is plugged into the DC input jack)
Combined Output: 1/4" - Connect 1 end
of a shielded 1/4"M to 1/4"M cable to the
1/4" mix output, then connect the other
end into your system input.
Individual Outputs: Connect a shielded
microphone cable to each channel’s
XLRM output, then connect the other
end into your mixer input.
4.
3.
Operation
1
4
3b
5
Optional Accessories
1.
HH38 Handheld Mic
3.
HS13-UBK Headset Mic
4.
LV-13BK Lav Mic
AS-GTRVE Guitar Cable
5.
2.
MBP38 Body Pack
1.
2.
For detailed instructions for finding the best frequencies, please consult the online manual.
7
With the transmitter for channel 2 turned
on, place the transmitter with it’s IR
window facing the receiver IR window,
about 6" away.
8
Press the ASC button on channel 2.
9
3.
5.
6
Press the ASC button on channel 1.
Press the “Select” button on channel 2
to choose a frequency number of 0-9
or A-F
Use the individual channel level controls
to adjust the volume of the channels.
These affect both the individual as well
as the combined outputs.
10
When the transmitter is synced, the red
RF light on channel 2 will illuminate.
When talking into the microphone the
green AF light will illuminate.
GAL A X Y AUDIO
Q
uick Start Guide
EDX
Wireless Microphone System
Included Components
1.
EDX Receiver x1
3.
Power Supply x1
4.
Quick Start Guide x1
2.
1/4" Cable x1
1.
2
3
2
Setup
1
With the transmitter for channel 1 turned
on, place the transmitter with it’s IR
window facing the receiver IR window,
about 6" away.
3a
When the transmitter is synced, the red
RF light on channel 1 will illuminate.
When talking into the microphone the
green AF light will illuminate.
3
4.
2.
Insert the 5.5 mm plug into the DC
input jack, then plug the wall wart into a
120VAC outlet.
Press the “Select” button on channel 1
to choose a frequency number of 0-9
or A-F.
Make sure the receiver is powered on.
(Powers on immediately when power
supply is plugged into the DC input jack)
Combined Output: 1/4" - Connect 1 end
of a shielded 1/4"M to 1/4"M cable to the
1/4" mix output, then connect the other
end into your system input.
Individual Outputs: Connect a shielded
microphone cable to each channel’s
XLRM output, then connect the other
end into your mixer input.
4.
3.
Operation
1
4
3b
5
Optional Accessories
1.
HH38 Handheld Mic
3.
HS13-UBK Headset Mic
4.
LV-13BK Lav Mic
AS-GTRVE Guitar Cable
5.
2.
MBP38 Body Pack
1.
2.
For detailed instructions for finding the best frequencies, please consult the online manual.
7
With the transmitter for channel 2 turned
on, place the transmitter with it’s IR
window facing the receiver IR window,
about 6" away.
8
Press the ASC button on channel 2.
9
3.
5.
6
Press the ASC button on channel 1.
Press the “Select” button on channel 2
to choose a frequency number of 0-9
or A-F
Use the individual channel level controls
to adjust the volume of the channels.
These affect both the individual as well
as the combined outputs.
10
When the transmitter is synced, the red
RF light on channel 2 will illuminate.
When talking into the microphone the
green AF light will illuminate.
Transmitter IR Window Locations:
Handheld IR is located on the end.
Body Pack IR is located inside the
battery compartment.
Receiver IR Window Location:
Center of the receiver face