Flickering Flame Solar Lanterns Set 2
K546
v001: 08/12/21
Please read and retain these instructions for future reference
ALWAYS POSITION IN DIRECT SUNLIGHT
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
Before using first time
CHARGING AND OPERATION:
1.
Set button which is located on the
bottom of item to “ON” position
for charging and charge by placing
it under direct sunlight for at least
8 hours.
2.
The light will work automatically. It
will charge under direct sunlight
during the day time and illuminate
at night.
NOTE: In order to verify that the
button is correctly in the “ON ”
position, cover the solar panel with
your hand and light should turn “ON” automatically.
Find an ideal Place for the Solar Light.
Place the solar light in an area where it will receive direct sunlight for at least 8 hours per day. The number of
hours the light will illuminate is directly proportional to the hours of sunlight it receives. If the ligh t is placed
in a shaded area, it will not be able to fully charge and its illumination time will be limited. Do not place the
light near other outdoor lighting like porch or streetlights. These may fool the sensor and keep the light from
coming on, or cause it to turn off automatically
Dimensions
(H) 27 x (W) 14 x (D) 14cm
•
1
X
AAA
1.2V
300
NI-MH
BATTERY
(REPLACEABLE)
•
CHARGING
TIME
–
6
–
8
HOURS
•
SOLAR
PANEL
SPEC
–
2V
45MA
•
EACH
LANTERN
INCLUDES
1
X
WARM
WHITE
LED
LIGHT
(NOT
REPLACEABLE)
