Pub. 42003-079C
GAI-Tronics Corporation P.O. Box 1060, Reading, PA 19607-1060 USA
610-777-1374
800-492-1212
Fax: 610-775-6540
G A I - T R O N I C S C O R P O R A T I O N
Printed Circuit Board Assembly
Replacement Kit
M
ODEL
12565-001
Confidentiality Notice
This manual is provided solely as an operational, installation, and maintenance guide and contains
sensitive business and technical information which is confidential and proprietary to GAI-Tronics. GAI-
Tronics retains all intellectual property and other rights in or to the information contained herein, and
such information may only be used in connection with the operation of your GAI-Tronics product or
system. This manual may not be disclosed in any form, in whole or in part, directly or indirectly, to any
third party.
General Information
This kit is used on the Model 701-10x Amplifiers. Installation of this kit will upgrade your Model 701-
10x Amplifier to a Model 701-20x Amplifier. In the future, you may replace the handset receiver, the
handset printed circuit board (Model 12550-001), and the speaker amplifier printed circuit board (Model
69701-007) separately. This kit is a one-time purchase only. This kit includes the following components:
Qty
Description
1
Handset Receiver
1
Handset Printed Circuit Board
1
Handset Speaker Amplifier Printed Circuit Board
1
Label
Installation
Removal of old receiver
1. Unscrew the microphone cap, and remove the microphone assembly.
2. Remove the screw securing the black wires. One black wire goes to the handset cord; the other wire
connects the microphone and the receiver. This kit requires the removal of the black wire connecting
the microphone and
receiver. Using the original screw, reconnect the black handset wire to
the microphone.
3. Unscrew the receiver cap.
4. Remove the receiver assembly from the handset.
Sold by:
http://www.TWAcomm.com
Toll Free: (877) 892-2666
