Furuno 9ZWRTR122, Installation Manual

Page: 1 / 26

www.furuno.com
All brand and product names are trademarks, registered trademarks or service marks of their respective holders.
Installation Manual
MARINE RADAR
Model
FAR-2218(-BB)/2228(-BB)/2318/2328/
FAR-2238S(-BB/-NXT/-NXT-BB)/
FAR-2338S(-NXT)/2328W/2338SW/
FAR-2258(-BB)/2358
SAFETY INSTRUCTIONS ........................i
SYSTEM CONFIGURATION ..................iii
EQUIPMENT LISTS...............................xii
1. INSTALLATION...............................1-1
1.1 Antenna Unit (X-band Radar) .............1-1
1.2 Antenna Unit (S-band Radar) ...........1-11
1.3 Monitor Unit.......................................1-17
1.4 Control Unit .......................................1-17
1.5 Power Supply Unit ............................1-24
1.6 Processor Unit ..................................1-25
1.7 Transceiver Unit................................1-27
1.8 Intelligent Hub (option)......................1-27
1.9 Switching Hub (option)......................1-28
1.10 Junction Box (option) ........................1-29
2. WIRING............................................2-1
2.1 Overview .............................................2-1
2.2 Antenna Unit for X-band,
TR-UP Radar ......................................2-5
2.3 Antenna Unit for X-band,
TR-DOWN Radar..............................2-19
2.4 Antenna Unit for S-band,
TR-UP Radar ....................................2-26
2.5 Antenna Unit for S-band,
TR-DOWN Radar..............................2-40
2.6 Power Supply Unit ............................2-46
2.7 Transceiver Unit................................2-53
2.8 Processor Unit ..................................2-59
2.9 Monitor Unit.......................................2-66
2.10 LAN Signal Converter .......................2-68
2.11 Junction Box (option) ........................2-71
2.12 Intelligent HUB (option).....................2-72
2.13 VDR Connection ...............................2-73
3. ADJUSTMENTS..............................3-1
3.1 How to Open the Radar Installation Menu ..3-3
3.2 How to Align the Heading ...................3-4
3.3 How to Adjust the Sweep Timing ........3-4
3.4 How to Suppress Main Bang ..............3-5
3.5 Other Settings .....................................3-6
3.6 How to Control Charts.......................3-26
4. INPUT/OUTPUT DATA ...................4-1
4.1 Processor Unit ....................................4-1
4.2 Sub Monitor.........................................4-3
APPENDIX 1 JIS CABLE GUIDE.....AP-1
APPENDIX 2 DIGITAL INTERFACE..AP-2
PACKING LISTS ................................. A-1
OUTLINE DRAWINGS ........................ D-1
INTERCONNECTION DIAGRAMS ..... S-1