EK-226P
INSTRUCTIONS
Supplied by
Laser Levels Online
– The Laser Level Specialists
www.laser-level.co.uk
Tel: 08000 869 769
Thank you for purchasing the
EK-226P
automatic Cross Line Laser Level kit.
These instructions are intended to explain the quick basics to operating this
equipment. If you need any more information, or the unit requires calibration
or repair, then please contact our Service Dept on tel 01246 269 777 or
fax 01246 260 007. We are here to help.
Power source:
Unscrew the battery cover & remove carefully.
Fit 3 x type AA alkaline batteries. Take care with correct polarity as marked
on the case. Refit the battery cover. The EK-226P will accept rechargeable
batteries but there is no provision for charging in the laser. You will need to
charge these batteries externally. We would also recommend that a spare set
of batteries are kept in the carry case as a back-up.
Positioning the Laser:
Mount the EK-226P on a generally level, firm surface or 5/8” threaded Tripod.
(note: an adapter may be required) To operate correctly, this surface must be
/-3 deg of true horizontal. Use the top bubble level as a "guide".
1
