background image

C o p y r i g h t

Copyright

Fujitsu PC Corporation has made every effort to ensure the 
accuracy and completeness of this document. However, as 
ongoing development efforts are continually improving the 
capabilities of our products, we cannot guarantee the accuracy 
of the contents of this document. We disclaim liability for 
errors, omissions,
or future changes.

Fujitsu and the Fujitsu logo are registered trademarks and Life-
Book is a trademark of Fujitsu Limited.

Intel and Pentium are registered trademarks and Centrino is a 
trademark of Intel Corporation or its subsidiaries in the United 
States and other countries.

The following are registered trademarks of IBM 
Corporation: IBM, IBM PC AT, IBM PS/2. 

The following are registered trademarks of Microsoft Corpora-
tion: MS, MS-DOS, Windows.

PCMCIA is a trademark of the Personal Computer Memory 
Card International Association.

Earthlink is a registered trademark of EarthLink Network, Inc. 

Memory Stick, Memory Stick Duo, and MagicGate are trade-
marks or registered trademarks of Sony Corporation and/or its 
affiliates.

Adobe Acrobat Reader is a registered trademark of Adobe 
Systems, Inc.

Netscape 7.0 is a registered trademark of Netscape Communi-
cations Corporation.

PowerQuest and Drive Image are registered trademarks of 
PowerQuest Corporation.

InterVideo and WinDVD are trademarks of Intervideo, Inc.

Realtek is a trademark of Realtek Semiconductor Corporation.

Norton AntiVirus is a registered trademark of Symantec 
Corporation.

The DVD player found in some models of the LifeBook note-
book incorporates copyright protection technology that is 
protected by method claims of certain U.S. patents and other 
intellectual property rights owned by Macrovision Corporation 
and other rights users. Use of this copyright protection tech-
nology must be authorized by Macrovision Corporation, and is 
intended for home and other limited viewing uses only unless 
authorized by Macrovision Corporation. Reverse engineering 
or disassembly is prohibited.

Dolby Headphone manufactured under license from Dolby 
Laboratories. Dolby is a registered trademark and Pro Logic 
and the double-D symbol are trademarks of Dolby Laborato-
ries. Copyrights 1992-1999 Dolby Laboratories. All rights 
reserved.

All other trademarks mentioned herein are the property of their 
respective owners.

© Copyright 2003 Fujitsu PC Corporation. All rights reserved. 
No part of this publication may be copied, reproduced, or 
translated, without prior written consent of Fujitsu PC Corpo-
ration. No part of this publication may be stored or transmitted 
in any electronic form without the written consent of Fujitsu 
PC Corporation.

B5FH-9911-01EN-00

Warning

Handling the cord on this product will expose 
you to lead, a chemical known to the State of 
California to cause birth defects or other 
reproductive harm. 

Wash hands after handling.

D E C L A R A T I O N   O F   C O N F O R M I T Y

according to FCC Part 15

Responsible Party Name:

Fujitsu PC Corporation

Address: 

5200 Patrick Henry Drive
Santa Clara, CA 95054

Telephone:

(408) 982-9500

Declares that product:

Base Model Configurations:

LifeBook P5020 notebook
LifeBook P5020D notebook

Complies with Part 15 of the FCC Rules.

This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions:

(1) This device must not be allowed to cause harmful interference, (2) This device must accept any
interference received, including interference that may cause undesired operation.

P5020.book  Page 1  Friday, September 12, 2003  4:43 PM

Summary of Contents for LifeBook P5020



























































































































Reviews: