background image

C o p y r i g h t

Copyright

Fujitsu PC Corporation has made every effort to ensure 
the accuracy and completeness of this document. 
However, as ongoing development efforts are continually 
improving the capabilities of our products, we cannot 
guarantee the accuracy of the contents of this document. 
We disclaim liability for errors, omissions, or future 
changes.

Fujitsu, the Fujitsu logo, and LifeBook are registered 
trademarks of Fujitsu Limited.

The following are registered trademarks of Microsoft 
Corporation: MS, MS-DOS, Windows.

PCMCIA is a trademark of the Personal Computer 
Memory Card International Association.

Intel and Pentium are registered trademarks and 
SpeedStep is a trademark of Intel Corporation or its 
subsidiaries in the United States and other countries.

Adobe Acrobat Reader is a registered trademark of 
Adobe System Inc.

Earthlink is a registered trademark of EarthLink 
Network, Inc. 

Quicken is a registered trademark of Intuit, Inc.

WinDVD is a trademark of InterVideo, Inc.

Netscape 6 is a registered trademark of Netscape 
Communications Corporation.

PowerQuest and Drive Image are registered trademarks 
of PowerQuest Corp.

McAfee is a registered trademark of Network Associates/
McAfee.com, Inc.

BayManager is a registered trademark of Softex, Inc.

The DVD player found in some models of the LifeBook 
notebook incorporates copyright protection technology 
that is protected by method claims of certain U.S. 
patents and other intellectual property rights owned by 
Macrovision Corporation and other rights users. Use of 
this copyright protection technology must be autho-
rized by Macrovision Corporation, and is intended for 
home and other limited viewing uses only unless autho-
rized by Macrovision Corporation. Reverse engineering 
or disassembly is prohibited.

Dolby Headphone manufactured under license from 
Dolby Laboratories. “Dolby”, “Pro Logic”, and the 
double-D symbol are trademarks or registered trade-
marks of Dolby Laboratories. Confidential Unpublished 
works. Copyrights 1992-1999 Dolby Laboratories. All 
rights reserved.

All other trademarks mentioned herein are the property 
of their respective owners.

© Copyright 2003 Fujitsu PC Corporation. All rights 
reserved. No part of this publication may be copied, 
reproduced, or translated, without prior written consent 
of Fujitsu PC Corporation. No part of this publication 
may be stored or transmitted in any electronic form 
without the written consent of Fujitsu PC Corporation.

B5FH-8481-01EN-00

DECLARATION OF CONFORMITY

according to FCC Part 15

Responsible Party Name:

Fujitsu PC Corporation

Address: 

5200 Patrick Henry Drive
Santa Clara, CA  95054

Telephone:

(408) 982-9500

Declares that product:

Model Configurations: LifeBook E4010

LifeBook E4010D

Complies with Part 15 of the FCC Rules.

This device complies with Part 15 of the FCC rules. Operations are subject to the following two conditions: (1) This 

device must not be allowed to cause harmful interference, (2) This device must accept any interference received, 
including interference that may cause undesired operation.

B5FH-8481-01EN-00.book  Page 1  Wednesday, April 9, 2003  9:40 AM

Summary of Contents for Lifebook E4010





































































































































Reviews: